Founded in 1998, Neware has built a strong reputation as a dedicated developer of battery testing systems for research laboratories, pilot lines, and battery manufacturing environments. The company focuses on delivering reliable, high-accuracy testing equipment that supports the evaluation of lithium-ion batteries, solid-state batteries, super capacitors, and emerging energy storage technologies across their full development lifecycle.
Neware's product range includes battery cyclers, multi-range battery testing systems, battery module and battery pack testers, and scalable battery test lines designed for both research and production use. These systems support precise charge and discharge control using constant current and constant voltage modes, configurable current ranges, voltage cut-off settings, and programmable charge/discharge steps to evaluate cycle life, performance degradation, and self-discharge behavior.
Advanced testing capabilities support electrochemical research and battery material research, including DCIR tests, cyclic voltammetry, potentiostatic intermittent titration technique, and EIS technology. Integrated temperature control solutions, thermal chambers, and high- and low-temperature cycling systems enable thermal stability studies, overcharge tests, forced discharge tests, and EV parameter assessment under realistic operating conditions. Safety-focused designs such as explosion-proof casings further support demanding test environments.
Neware systems are supported by BTS software and analysis software that allow test recipe creation, curve comparison, data management, and network communication for automated workflows. MSE Supplies LLC connects customers with Neware battery testing systems through a technology-focused, business-friendly sourcing experience, supporting research, development, and production needs with streamlined procurement options.
Test Conditions Beyond the Cycler: Sample Preparation and Thermal Stability in Battery Research
A Neware system measures what the cell delivers during charge and discharge, but the data it produces reflects the test environment as much as the material under study. Cell composition, thermal stability, and electrochemical cell geometry each contribute systematic offsets that can mask genuine degradation trends or introduce apparent differences between runs that share no real materials distinction. Controlling these surrounding variables is what separates cycling results that are comparable across experiments from results that are only meaningful within a single session.
Cell Material Quality and Electrode Baseline
The starting condition of a cell determines the reference point against which all later capacity values are measured. Lithium ion battery materials covering electrode actives, separator films, electrolytes, and current collectors set the baseline electrochemical environment before the first cycle is applied. The electrochemical test cells chosen, whether two-electrode coin cell geometries or three-electrode split cell configurations, determine how cleanly the working electrode contribution is isolated from counter and reference signals, which sets a precision ceiling the cycler can reach only when the cell geometry does not introduce its own artifacts.
Thermal Control Over Long Cycling Protocols
Temperature variation during extended cycling runs introduces drift that appears as capacity change in the log file even when the material itself is stable. Climate and stability chambers provide a controlled enclosure around the test cell, holding temperature to a defined setpoint across hundreds of cycles and removing ambient laboratory fluctuations from the data. For cycler platforms that require fluid cooling, a recirculating chiller supplies stable coolant to the platform thermal management circuit. Both address thermal noise from different positions in the test stack and operate independently of the cycler hardware itself.
Connecting Cycling Results to Powder Characterization
Degradation trends identified in cycling data, fade rate, impedance growth, voltage hysteresis, point toward mechanisms that the battery cycler reading alone cannot identify. Morphological, surface area, and particle size data from the battery characterization collection provide the structural context that explains what changed inside the electrode during cycling. For an overview of all laboratory instrumentation and materials available from MSE Supplies, the Materials Science products hub covers the full catalogue across research categories.
Neware system accuracy is a function of what surrounds the cycler as much as the instrument itself. Cell material quality, test cell geometry, and thermal environment each set a floor on data comparability that the cycler cannot improve on its own. Addressing all three gives the system the conditions it needs to report what the material actually does.
What to know before you buy
This page lists Neware battery tester equipment, from multichannel cyclers for coin cells to high power systems for modules and packs, plus the racks, clamps and temperature chambers that go with them.
For coin cells and small lab cells, the CT-4008T series covers low current ranges such as 5V10mA, 5V20mA and the Neware CT-4008T 5V50mA battery testing system. For more precise low-current work, the CT-4008Q 5V100mA is a 4 range system with 0.02 percent FS accuracy. For cylindrical and pouch cells, higher current models include the Neware CT-4008Q 5V6A system, the CT-4008T 5V12A and the CT-4008 10V6A. The CE-6002n systems test modules at 100V100A and packs at 500V400A.
Connect cells with the coin cell clamp for CT-4008T testers, pouch cell clamps or alligator clamps, and mount testers in racks for 4 or 10 units. For tests at set temperatures, add the MHW-25-S benchtop temperature chamber or the WIHW-200L-160CH-B all-in-one coin cell system. Our article on battery characterization explains common test methods.
Frequently Asked Questions
How do I choose the right Neware current range?
Choose a range whose maximum current sits just above your highest test current. Accuracy is a share of full scale, so a smaller range gives finer resolution at low currents. Coin cells usually fit the CT-4008T 5V10mA or 5V20mA, while 18650 and pouch cells need amp-level ranges such as 5V6A.
Which Neware tester suits cylindrical and pouch cells?
Use a model built for amp-level currents. The CT-4008T 5V12A and CT-4008Q 5V6A are listed for cylindrical and pouch cells, and the CT-4008 10V6A covers cells or small stacks above 5 V. Pair them with pouch cell clamps for secure tab contact.
What accessories do I need to start testing?
You need a clamp or fixture for each channel, a control unit to link testers to the computer and a rack for tidy cabling. The Neware middle machine control unit, coin cell clamps and the portable rack for up to 10 units are listed here.
Do I need a temperature chamber for battery testing?
Cycle life and capacity change with temperature, so controlled tests need a stable environment. The Neware MHW-25-S benchtop temperature chamber holds cells at set temperatures while they cycle. For many coin cells, the WIHW-200L-160CH-B combines chamber and channels in one unit.
Can I order a multi-unit Neware setup or a specific configuration?
Yes. Send your cell types, channel count and current needs through the quote request form and we will match testers, clamps, racks and control units. For repeat orders of the same tester, use the bulk order request form.
